General Construction |
| G1.01 Teifs One Coat over Wood Frame |
DWG |
DXF |
| G1.01A One Coat WaterMaster over Wood Frame |
DWG |
DXF |
| G1.01B One Coat Krak-Shield over Wood Frame |
DWG |
DXF |
| G1.01C One Coat WaterMaster Krak-Shield over Wood Frame |
DWG |
DXF |
| G1.02 Teifs One Coat over Steel Frame |
DWG |
DXF |
| G1.02A One Coat WaterMaster over Steel Frame |
DWG |
DXF |
| G1.02B One Coat Krak-Shield over Steel Frame |
DWG |
DXF |
| G1.02C One Coat WaterMaster Krak-Shield over Steel Frame |
DWG |
DXF |
| G1.03 Teifs One Coat over CMU |
DWG |
DXF |
| G1.03A One Coat WaterMaster / TeifsBase Staydry over CMU |
DWG |
DXF |
| G1.04 Teifs One Coat over CMU with EPS and Lath |
DWG |
DXF |
| G1.04A One Coat over Exterior Sheathing with Expanded Polystyrene |
DWG |
DXF |
| G1.04B One Coat over Open Frame with Expanded Polystyrene |
DWG |
DXF |
| G1.05A Flashing Rough Window Opening |
DWG |
DXF |
| G1.05B Flashing Rough Window Opening |
DWG |
DXF |
| G1.05C Flashing Rough Window Opening |
DWG |
DXF |
| G1.05D Alternate Window Flashing Procedure |
DWG |
DXF |
| G1.05E Flashing Rough Window Opening |
DWG |
DXF |
| G1.06 Typical Expansion and Control Joint Locations |
DWG |
DXF |
| G1.07 Bull-Nose Corner-Square Corner |
DWG |
DXF |
| G1.08 Bull-Nose Corner-Square Corner on Insulation |
DWG |
DXF |
| G1.09 Inside Corner |
DWG |
DXF |
Expansion Joints |
| E1.01 Control and Expansion Joint |
DWG |
DXF |
| E1.02 Plaster Ground Detail |
DWG |
DXF |
| E1.06 Backer Rod and Elastomeric Sealant |
DWG |
DXF |
Terminations |
| T1.01 Termination at Sheathed Frame Base |
DWG |
DXF |
| T1.03 Termination at Roof Line |
DWG |
DXF |
| T1.04 Termination at Pavement |
DWG |
DXF |
Windows |
| W1.01 Window Jamb No Insulation Board |
DWG |
DXF |
| W1.02 Window Head No Insulation Board |
DWG |
DXF |
| W1.03 Window Sill No Insulation Board |
DWG |
DXF |
Roof Line |
| R1.01 Wood Frame - Double Faced Parapet |
DWG |
DXF |
| R1.02 Termination at Deck or Gable Flashing |
DWG |
DXF |
| R1.03 Fascia / Soffit Joint |
DWG |
DXF |
Aesthetic Features |
| A1.01 EPS Feature over Teifs One Coat |
DWG |
DXF |
|