Teifs Warranty Request
Warranty Checklist
Yes
No
Unknown
Materials
EPS flat and square
Substrate type:
Level within 1/4" in 8 feet
Cleaned/properly prepared
TeifsBASE/Adhesive
Mixed properly
Type:
Expanded Polystyrene
All back wrapping installed
EPS in Teifs bag
Ribbon and dab    Notched trowel (select one)
Mechanical fasteners used
Correct fastening pattern used
EPS thickness as shown on drawings
Board joints tight
Running bond pattern used
Joints staggered over openings
Aesthetic joints correct per drawings
EPS leveled 1/4" in 8 feet
Adhesive thickness per job specification
Adhesive cured properly
Openings left for sealants
Base Coat/Mesh Installation
Mixed 1 to 1 by weight
Mesh embedded
Proper weight mesh used (as shown on drawings)
15 or 20 ounce mesh installed first
Standard mesh lapped 2 1/2"
Expansion joints as shown on drawings
Joint size per architect
All EPS encapsulated
Additional reinforcing mesh at all openings
Corners double reinforced
Base coat cured properly
     
Teifs Finish      
Color/Texture approved
Sample mock-up done and approved
Batch numbers recorded
Base coat inspected prior to application
Mixed correctly
Applied with correct trowel for texture (approved by architect)
Texture uniform
Base coat completely covered
Finish left off surfaces to receive sealant
Sealant contractor used primer over base coat

I hereby request a warranty be issued for the TEIFS products installed by our firm on the project. I confirm and certify that our firm is knowledgeable of TEIFS published specifications and installation details applicable at time of installation and that we are trained in the application of EIFS products.

_________________________________________
Licensed Contractor (signature)             

Warranty Requested by:__________________________________________


Teifs Warranty Request Form

Date:
Type of Warranty requested:
Project Name:
          Address:
          City/State/Zip Code:
Date Started:      Completion Date:
System/Product Used:
          Square Footage:
Owner:
          Address:
          City/State/Zip Code:
General Contractor:
          Address:
          City/State/Zip Code:
Architect:
          Address:
          City/State/Zip Code:
Licensed Applicator:
          Address:
          City/State/Zip Code:
          Certificate Number:
Distributor:
PLEASE PRINT OUT, SIGN AND FAX ALL 3 PAGES TO (210) 472-2946